iHealth PT2L Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Термометр iHealth PT2L. iHealth PT2L 15 сторінок. Infrared digital no-touch thermometer

Друкувати сторінку

cellphone in-use) as EM interference may cause errors in the reading or even device

failure.

14. This product should be considered a personal device. Clean and sanitize the product

properly to prevent cross contamination.

If performance of the instrument may be adversely affected should one or more of

the following occur:

Operation outside of the manufacturer-specified subject temperature range.

Operation outside of the manufacturer-specified operating temperature and

humidity ranges.

Storage outside of the manufacturer-specified ambient temperature and

humidity ranges.

Mechanical shock.

Manufacturer-defined soiled or damaged infrared optical components.

15. ASTM laboratory accuracy requirements in the display range of 37 to 39 °C (98 to

102 °F) for IR thermometers is ±0.2 °C (±0.4 °F), whereas for mercury-in-glass and

electronic thermometers, the requirement per ASTM Standards E667-86 and E1112-

86 is ± 0.1 °C (±0.2 °F).

16. If you are allergic to plastic/rubber, please don't use this device.

17. The materials of expect contact with patient had passed the ISO 10993-5 and ISO

10993-10 standards test, no toxicity, allergy and irritation reaction. They are in

compliance with the MDD requirements. Based on the current science and

technology, other potential allergic reactions are unknown.

18. The patient is an intended operator.

19. This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

—

Reorient or relocate the receiving antenna.

—

Increase the separation between the equipment and receiver.

—

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

—

Consult the dealer or an experienced radio/TV technician for help.

20. This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

21. Forehead temperature readings on this device are equivalent to oral readings.