HighPoint R1000 Series Посібник зі швидкого встановлення - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Контролер HighPoint R1000 Series. HighPoint R1000 Series 10 сторінок. 4x m.2 port to pcie 3.0 x8/x16 nvme hba's
Також для HighPoint R1000 Series: Посібник зі швидкого встановлення (8 сторінок), Посібник зі швидкого встановлення (9 сторінок)

Step 8. After installing all SSDs, carefully flip the heatsink to the right.

Note:

Make sure the SSD's are carefully, but securely installed

into each M.2 port. Loose connections can cause a variety of

stability and performance issues, and may ultimately result in

data loss.

Note:

Make sure the heatsink/fan panel is properly aligned with

the controller board (PCB), and that it makes full contact with the

thermal pads before refastening it to the NVMe HBA. If the

heatsink is improperly installed, it will be unable to sufficiently

cool the NVMe SSD's and controller componentry, which may

result in damage to the SSD's or controller hardware,

performance loss, unstable I/O, and the loss of data.

Step 9. Carefully reinsert in the power supply cable of the cooling fan

that was removed in step 2.