AFL FlexScan TS100 Короткий довідник - Сторінка 12

Переглянути онлайн або завантажити pdf Короткий довідник для Інструменти AFL FlexScan TS100. AFL FlexScan TS100 19 сторінок. Optical troubleshooter

Light Source and Power Meter Operation

Light Source Settings and Features

1. Touch Laser On/Off to enable/disable light source. RED Laser indicates that source is ON.

2. Touch Modulation field to select source modulation: Wave ID, CW, Tone (270 Hz, 330 Hz, 1 kHz, 2 kHz).

– Select Wave ID mode for fastest loss measurements. While in this mode, the FlexScan source transmits wavelength information, enabling a

Wave ID power meter to synchronize and measure power at received wavelength(s).

– Use CW mode to generate continuous wave light at a single wavelength for loss measurements with non-Wave ID power meter.

– Generate Tone for fiber identification (270 Hz, 330 Hz, 1 kHz, 2 kHz).

3. Touch Wavelength field to select test wavelength.

Power Meter Settings and Features

4. If used with non-Wave ID source, touch

If used with Wave ID source, power meter automatically

synchronizes to and indicates received wavelength(s).

5. Touch and hold Ref/Set to store new reference(s) at received

wavelength(s). Touch and release Ref/Set to view stored

reference(s).

6. Touch dB/dBm to toggle between power (dBm or Watts

(mW, μW, nw)) and loss (dB) mode.

– Power meter detects and indicates fiber identifying tones

when used with a light source capable of generating a

modulated Tone signal.

Notes:

7. Touch Menu to select Test/Home screen Menu.

– Allows user to Save or Send OPM results.

8. Touch Back to return to the previous screen.

to select wavelength.