Maisi M20 Посібник із швидкого старту - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Відеокамера. Maisi M20. Maisi M20 17 сторінок.

√

You can choose

and press OK to confirm the action.

2) If you choose <Delete all files> and press OK to confirm. You should see this:

Delete all files? –

√

You can choose

and press OK to confirm the action.

Note: If a file is locked (protected), you will not be able to delete it on the camcorder, but

you can delete it on your computer.

5.5 How to Access the Files on Computer?

Please connect the Camcorder to a computer via a USB cable, the USB cable should be

connected to the USB port on the right side of the camcorder, not DC IN port. The device will

show up as a Removable Disk on your computer. It normally contains folders as below:

EVENT: This file contains emergency recordings which will not be overwritten in the loop

recording. The device can save up to 50 emergency recordings. This files requires manual

deletion on computer.

HD Player: This file contains default player Eyelog and DataKam, which are compatible with

Windows system ONLY.

NORMAL: This file contains normal recordings saved and pictures you have taken. These

recordings can be overwritten in the loop recording. You can delete these recordings/pictures

either on camcorder on or on computer.

5.6 Playback Files on Computer

Please install these two players on your Windows computer. Add the files to player by clicking

the Green "+" icon.

If your camcorder has a GPS dongle, you can see the GPS information (Route/speed etc.) on

the player as well as recorded footage while playback. If your camcorder does not have a GPS,

dongle, you will be able to read the G-senor data and recorded footage with these two players.

You can also playback the footage by windows media player or Quick Time player, but the

image quality could be impacted in some cases.

√

Page 13 of 16