GameChanger Motor Synth Короткий посібник - Сторінка 8
Переглянути онлайн або завантажити pdf Короткий посібник для Синтезатор GameChanger Motor Synth. GameChanger Motor Synth 14 сторінок.
Друкувати сторінку
8 NOTE RECORD
THE MOTOR SYNTH CAN RECORD AND PLAY BACK NOTE SEQUENCES
PERFORMED IN REAL TIME. NOTE SEQUENCES MAY BE STACKED IN MULTIPLE
LAYERS AND PLAYED BACK AS VARIABLE-LENGTH LOOPS.
PRESS THE "REC" KEY TO ARM THE RECORDING ENGINE - YOU WILL SEE THE
"REC" KEY AND RECORD SYMBOL ON THE MAIN SCREEN START TO BLINK.
ONCE THE REC ENGINE IS ARMED, IT WILL START RECORDING AS SOON AS
YOU ENTER THE FIRST NOTE
ALTERNATIVELY, YOU CAN START RECORDING FROM SILENCE BY FIRST
ARMING THE "REC" KEY AND THEN PRESSING THE "PLAY/STOP" KEY.
PRESS THE "REC" KEY AGAIN TO STOP RECORDING AND COMPLETE THE LOOP.
USE THE "PLAY/STOP" KEY TO PAUSE OR RESTART THE REC ENGINE.
USE THE "CTRL" ENCODER TO START AND STOP INDIVIDUAL TRACKS AND
ADJUST EACH LOOP'S LENGTH AND ASSIGN VOICES.
USE "DEL" TO ERASE INDIVIDUAL TRACKS, OR
9 MOTION RECORD
YOU CAN ALSO USE THE MOTOR SYNTH'S RECORDING ENGINE TO RECORD UP TO
THREE LAYERS OF KNOB MOVEMENTS AND OTHER PARAMETER CHANGES.
PRESS AND HOLD THE "REC" KEY TO ARM THE MOTION RECORD ENGINE.
NOW ANY KNOB, ENCODER, BUTTON OR SWITCH YOU TOUCH WILL BE ASSIGNED TO
ONE OF THREE MOTION REC TRACKS, AND THE PARAMETER CHANGES WILL BE
RECORDED - THE RECORDING STOPS AS SOON AS THE "REC" KEY IS RELEASED.
WHEN RECORDED SEPARATELY, TRACKS WILL HAVE
IF MULTIPLE PARAMETERS ARE RECORDED IN ONE TAKE, THEN ALL TRACKS WILL
HAVE THE SAME LOOP LENGTH.
USE "DEL" TO ERASE INDIVIDUAL TRACKS, OR
ALT + "DEL"
TO ERASE ALL.
VARIABLE LOOP LENGTHS.
ALT + "DEL"
TO ERASE ALL.
NOTES CAN BE RECORDED FROM THE
MOTOR SYNTH'S BUILT IN MUSICAL
INTERFACE, OR FROM AN EXTERNAL MIDI
INSTRUMENT OR CV SOURCE.
DISCLAIMER!
THE NOTE RECORD FUNCTION IS NOT
YET FULLY READY FOR LAUNCH.
IT WILL BE RELEASED WITH
THE FIRST FIRMWARE UPDATE IN
THE BEGINNING OF AUGUST 2020!
PRESS ALT + "REC"
TO SWITCH
BETWEEN THE KEYPAD, THE NOTE
RECORD AND MOTION RECORD SCREENS.
USE THE "CTRL" ENCODER TO PAUSE OR
PLAY SEPARATE TRACKS, TO ADJUST
THEIR PLAYBACK SPEED AND DIRECTION.