GameChanger Audio BIGSBY Посібник із швидкого старту - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Музична педаль GameChanger Audio BIGSBY. GameChanger Audio BIGSBY 8 сторінок.

RATE

When the RATE knob is turned all the way down (the knob is dark), the BIGSBY Pedal's

pitch-shift algorithm precisely follows the movement of the foot-pedal, and stays static for as

long as the pedal is pressed down.

Turning up RATE will put BIGSBY Pedal into "Auto Mode", and the knob will start ﬂashing.

In Auto Mode the pitch shift depth oscillates rhythmically at a given speed, while the maximum

depth of the pitch-shift is determined by the amount of pressure applied to the foot-pedal.

Adjust the RATE knob to change the speed of the vibrato eﬀect.

When in Auto Mode, turning up the BLEND knob will produce a chorus-style eﬀect.

When using MIDI, the BIGSBY Pedal can be synced to an external clock source (see page 6).

In this case, the RATE knob lets you scroll through a variety of beat subdivisions. There is also a

dedicated CC message for adjusting the oﬀset of the vibrato curve.

DEPTH

The BIGSBY Pedal's DEPTH knob allows you to set diﬀerent values for the downward and

upward pitch-shift intervals.

Press the SELECT button to enter the RED layer, which is indicated by a red backlight on the

pedal's knobs. Use the DEPTH

knob to set the desired upward pitch-shift value.

Toggling the INVERT switch on the pedal's back panel will only aﬀect the foot-pedal's direction -

the DEPTH values set up for both downward and upward pitch-shifting will remain set.

TONE

The TONE knob adjusts the brightness of the WET signal produced by the BIGSBY Pedal.

The DRY (unpitched) signal is not aﬀected by the TONE control.

When the TONE knob is turned all the way down the WET signal will have a muﬄed, dark

character - this is well-suited for imitating lower register instruments.

Turn the TONE knob all the way up to boost the WET signal's high frequencies -

thus highlighting note attacks and overall string brightness.

DETUNE

The BIGSBY's DETUNE function emulates the instability and asymmetrical nature of traditional

hardware tremolo systems.

When the DETUNE knob is turned all the way down, the BIGSBY will produce even pitch-shifts.

When DETUNE is turned all the way up, chords will have the familiar "out of tune" eﬀect -

a characteristic of mechanical string bending systems. Single notes will also sound "out of tune"

and "warbly".

KNOB LOCK

The BIGSBY Pedal's knobs can be temporarily locked in order

to prevent accidental adjustments during a live performance etc.

To lock the current knob settings, hold the SELECT

button and toggle the INVERT switch on the back of the pedal.

When the pedal is locked, all knob adjustments will be ignored, which will be indicated by

ﬂickering knobs.

The SELECT button will still function as a toggle between the WHITE and RED knob layers.

To unlock the knobs, toggle the INVERT switch to it's original position.