Majella audio MVCF-I Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Системи фільтрації води Majella audio MVCF-I. Majella audio MVCF-I 4 сторінки.

INTRODUCTION

The MVCF-I is 12dB/oct voltage controlled

filter, with lowpass and hi-pass mode. The

MVCF-I has voltage controlled resonance

and cutoff. There is control over the input

gain and the resonance can be driven into

self-oscillation.

CONTENT

In the box of the assembled version of the

MVCF-I contains the. following

•! Assembled and Tested Module

•! 16 pin to 16 pin ribbon cable

•! Mounting hardware: 4x M3 screws

and

washers

protectors

If anything of the above is missing. Please

contact your dealer or support@majella-

audio.com

SPECIFICATIONS

•! Dimensions: 128.5 x 30 x 45 mm

(6HP)

•! Doepfer A-100 Eurorack compatible

(16 pin power connector)

•! Power consumption: +/-12V (15mA)

rack

crash

Voltage contolled Filter

POWER CONNECTION

This module is designed to be connected to

your Eurorack system, using a 16-pin ribbon

cable. The -12V (red stripe) should be

directed as shown in the picture below.

WARNING!

This module is designed for Eurorack

systems. The supply should be +-12V and

connected signals should not be out of the

+-12V range! Do not reverse polarity when

connecting the power, this will damage

your module permanently!

(MVCF-I)

User Manual