Afore HNS3000TL Посібник користувача Встановлення - Сторінка 15
Переглянути онлайн або завантажити pdf Посібник користувача Встановлення для Інвертор Afore HNS3000TL. Afore HNS3000TL 17 сторінок. Pv inverter single mppt
Друкувати сторінку6 Commissioning
After completing the mechanical and electrical installation, the inverter is put into
operation.
1. Switch on the DC and AC breakers.
The inverter starts up automatically when the power from PV generator is sufficient.
2. Check whether the display and LEDs are indicating a normal operating state.
A
Green
B
Red & LCD backlight
7 System Diagram
The typical connection diagram for the entire PV system is shown in the following
figure.
1. PV Panel: Provide DC power to inverter
2. Inverters: Converts DC (Direct Current) power from PV panel(s) to AC (Alternating
Current) power. Because Inverter is grid-connected it controls the current amplitude
according to the PV Panel power supply. Inverter always tries to convert the
maximum power from your PV panel(s).
3. Connection system: This "interface" between Utility and PV-Inverter may consist of
electrical breaker, fuse and connecting terminals. To comply with local safety
Glowing, operation
Flashing, contact installer
13 / 15