Adexi 81560007 Посібник - Сторінка 14
Переглянути онлайн або завантажити pdf Посібник для Метеостанція Adexi 81560007. Adexi 81560007 16 сторінок.
Друкувати сторінку7 TROUBLESHOOTING GUIDE
If your question is not answered here, please contact our customer service.
Problem
Wireless remote
(thermometer) not
reporting in to console.
There are dashes (--.-)
on the display console.
Temperature sensor
reads too high in the
day time.
Indoor and Outdoor
Temperature do not
agree
Display console
contrast is weak
UK
Solution
If sensor communication is lost, dashes (--.-) will be
displayed on the screen. To reacquire the signal, To
resynchronize, press both the °C / °F and High / Low
Record buttons at the same time for five seconds., and
the remote search icon
reacquired, the remote search icon
current values will be displayed.
The maximum line of sight communication range is 265'
and 100' under most conditions. Move the sensor assembly
closer to the display console.
If the sensor assembly is too close (less than 5'), move the
sensor assembly away from the display console.
Make sure the remote sensor transmitter light is flashing
once per 60 seconds.
Install a fresh set of batteries in the remote thermometer.
For cold weather environments, install lithium batteries.
Make sure the remote sensors are not transmitting through
solid metal (acts as an RF shield), or earth barrier (down a
hill).
Move the display console around electrical noise
generating devices, such as computers, TVs and other
wireless transmitters or receivers.
Move the remote sensor to a higher location. Move the
remote sensor to a closer location.
Make sure the thermometer is mounted in a shaded area
on the north facing wall.
Allow up to one hour for the sensors to stabilize due
to signal filtering. The indoor and outdoor temperature
sensors should agree within 2 °F (the sensor accuracy is ±
1 °F).
Use the calibration feature to match the indoor and outdoor
temperature to a known source.
Replace console batteries with a fresh set of batteries.
14
will flash. Once the signal is
will turn on, and the