Major MT 730 Інструкція з експлуатації - Сторінка 15

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Вимірювальні прилади Major MT 730. Major MT 730 16 сторінок. Ac clamp meter

Major MT 730 Інструкція з експлуатації

15. BATTERY REPLACEMENT

When the " BAT " sign appears on the LCD, this
indicates the battery should be replaced. Use the
following procedure to replace the two standard
"AAA" 1.5V batteries (IEC LR 3) batteries.
1. Disconnect the test leads from any live source
and remove the leads from the input terminals.
2. Rotate the function switch to the
position.
3. The battery cover is secured to the bottom of
the case by a screw. Using a screwdriver
remove the screw from the battery cover and
remove the battery cover from the meter.
4. Remove the old battery and replace it with two
new IEC LR 3 1.5V batteries.
5. Replace the battery cover and reinstall the
screw.

16. OPTIONAL ACCESSORIES

HDT 1282
ComfiGrip™ Test Leads
CAT lV 600V, CAT lll 1000V
10A Rating
14
Battery Cover
HDT 3914
Crocodile Clip
CAT lll 600V, CAT ll 1000V
10A Ratings
OFF