IKEA NUTID Посібник з монтажу та інструкція з експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник з монтажу та інструкція з експлуатації для Холодильник IKEA NUTID. IKEA NUTID 46 сторінок. French door refrigerator
Також для IKEA NUTID: Посібник з монтажу (16 сторінок), Посібник з монтажу (12 сторінок), Інструкція з монтажу Посібник з монтажу (12 сторінок)
Друкувати сторінку
Replace Door and Hinges
Standard Door
NOTE: Graphics may be reversed if door swing is reversed.
1. Replace the parts for the bottom hinge as shown. Tighten
screws.
NOTE: Provide additional support for the door while the
hinges are being moved. Do not depend on the door gasket
magnets to hold the door in place while you are working.
2. Assemble the parts for the top hinge as shown in Top Hinge
graphic. Do not tighten screws completely.
3. Adjust the door so that the bottom of the refrigerator door
is aligned with the top of the freezer drawer. Tighten all
screws.
French Doors
1. Assemble the parts for the top hinges as shown in Top
Hinge graphic. Do not tighten the screws completely.
2. Replace the parts for the bottom hinges as shown in
Bottom Hinge graphic. Tighten screws. Replace the
refrigerator doors.
NOTE: Provide additional support for the refrigerator doors
while the hinges are being moved. Do not depend on the
door gasket magnets to hold the doors in place while you
are working.
3. Align each door so that the bottom of the refrigerator door
aligns evenly with the top of the freezer drawer. Tighten all
screws.
4. Reconnect the wiring plug on top of the left-hand side
refrigerator door.
5. Replace the top hinge covers.
8
Remove and Replace Freezer Drawer
IMPORTANT:
Two people may be required to remove and replace the
■
freezer drawer.
All graphics are included later in this section after "Final
■
Steps."
Remove Drawer Front
1. Open the freezer drawer to full extension.
Loosen the four screws attaching the drawer glides to the
drawer front. See Drawer Front Removal graphic.
NOTE: Loosen screws three to four turns. Keep the screws
in the drawer front.
2. Lift drawer front upward and off the screws. See Drawer
Front Removal graphic.
Replace Drawer Front
1. Slide the drawer glides out of the freezer compartment.
Insert the screws in the top of the drawer front into the slots
in the drawer brackets. See Drawer Front Replacement
graphic.
2. Pull the drawer brackets toward you to insert the two
screws in the bottom of the drawer front into the brackets.
See Drawer Front Replacement graphic.
3. Completely tighten the four screws.
Final Steps
1. Check all holes to make sure that hole plugs and screws are
in place. Reinstall top hinge cover as shown in Top Hinge
graphic.
2. Replace the base grille.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
3. Plug into a grounded 3 prong outlet.
4. Return all removable door parts to door and food to
refrigerator.