Airgain AirgainConnect AC-HPUE Посібник із швидкого старту

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Бездротова точка доступу Airgain AirgainConnect AC-HPUE. Airgain AirgainConnect AC-HPUE 2 сторінки.

Друкувати сторінку

Sierra Wireless MG90

Cradlepoint IBR900

LAN

WAN

Laptop docking station

AirgainConnect

AC-HPUE™ Quick Start Guide

1. Connect the Ethernet Cable to the Router or laptop WAN port on one end and to

the Ethernet Injector LAN port on the other end. If your model of AirgainConnect

has coaxial cables for Wi-Fi and GNSS/GPS, connect those cables to the

appropriate SMA ports on your router.

2. Connect the AC-HPUE AC adapter to a power source. Airgain can recommends a

high quality power inverter for this purpose.

3. Connect the power cable 4-pin connector to the Ethernet Injector PWR IN port.

Power

Cable

4. Connect the HPUE USB and power cable to the Ethernet Injector.

5. Connect the cigarette lighter connector to the vehicle lighter port. Note that if your

vehicle leaves this power port operational when the ignition is off, remove this

connector to power off the AC-HPUE.

Ethernet Injector