Align-Pilates C1 Інструкція з монтажу Посібник з монтажу - Сторінка 11
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Фітнес-обладнання Align-Pilates C1. Align-Pilates C1 16 сторінок. Full cadillac
Notes on Safe Usage
The equipment is intended for use for recognised Pilates repertoire only, by or, under the instruction of a
qualified Pilates professional. Access to the equipment by children without a qualified professional in
attendance must be prevented.
The C1 & A2 Half and Full Cadillac's and related accessories are designed for inside use only and on a
level floor with suitable clearance around the equipment for safe operation. This free area should be not
less than 0,6 m greater than the training area in the directions from which the equipment is accessed. The
free area must also include the area for emergency dismount. Where equipment is positioned
adjacent to each other the value of the free area may be shared.
The maximum user weight for the equipment is 150Kg. When using the Full Cadillac it is not
recommended to take your centre of gravity outside the frame as this may affect the stability of the
equipment and could result in an accident. Recognised Pilates repertoire does not recommend this any-
way.
Particular care must be taken when using the swing through bar. The safety strap MUST be used when the
push-through springs are attached to the push-through bar from the bottom side. If you do not take this
precaution, the user can get seriously injured. Further the user must never let go of the swing bar when
under spring tension.
Periodic Maintenance
Please check the apparatus before first use and after each of the first few uses to check that all the fittings
are securely fastened. Thereafter it is important to follow a regular maintenance schedule by someone
familiar with the equipment and record your maintenance checks. Equally inspection should be made
immediately if any part appears not be operating correctly or something appears to be loose. Below
follows a basic maintenance guide though our detailed maintenance guide and a sample maintenance
log can be downloaded from
• Springs & Spring Clips
Inspect all springs for signs of wear, look for deformation, kinks, gaps and corrosion. Springs showing
signs of damage must not be used and must be replaced immediately. Check all spring clips and
carabiners for signs of wear, ensuring there is no deformation and that the "gates" firmly engage.
Springs must be replaced every 2 years.
• Hardware
Ensure all nuts, bolts and screws are securely fastened.
• Slings, Loops & Handles
Check all stitching for wear and damage and replace immediately as needed.
• Travelling Carriages
Inspect travelling carriages to ensure threaded bolts are secure. Test to ensure the locking push pins
engage securely into the upright frame.
• Eyelets & Spring Hooks
Hand check all eyelets on the sliding spring eyelets, swing through and roll down bar are tight and
cannot rotate. If loose remove, apply blue Loctite and retighten.
• Feet Level
Confirm bed is level and all the feet are in contact with the ground or this will affect stability
• Star Knobs
Check wear and replaced as needed.
• Push-through Bar
Confirm all push-through bar bolts and nuts are securely fastened.
• Upholstery
Regularly clean all upholstery on your Align equipment, we recommend using Gym Wipes from Vital
Clean (www.vital-clean.de) as these will not damage your upholstery. Beware that some bactericides
and strong or abrasive cleaning products will dry out the vinyl and reduce its life. Vinyl is
non-absorbent, so will not absorb dirt so surface wiping is all that is required
https://www.mad-hq.com/align-pilates-resources
11