Alinco DJ-196 Інструкція з експлуатації - Сторінка 16

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Трансивер Alinco DJ-196. Alinco DJ-196 18 сторінок. Vhf/uhf fm transceiver
Також для Alinco DJ-196: Інструкція з експлуатації (20 сторінок)

Друкувати сторінку

Here is the explanation of each function.

[No.1] Battery Save Function ON/OFF

1. [BS-ON] appears on the LCD.

2. Rotate the dial, and the display toggles as shown below. Then ON and OFF are

switched repeatedly.

..downward

upward.....

......BS-ON → BS-OF ..........

........................................

[No.2] Scan Type Selection

1. [TIMER] appears on the LCD.

2. Rotate the dial, and the display toggles as shown below. The scan types are

switched repeatedly.

.downward

upward.....

.....TIMER .....BUSY .....

................................

[No.3] Beep Tone ON/OFF

1. [BEP-ON] appears on the LCD.

2. Rotate the dial to set to [BEP-OF].

3. Each time the dial is rotated, ON and OFF are switched repeatedly.

[No.4] Tone Burst Frequency Setting

1. [1750] appears on the LCD.

2. Rotate the dial, and the display toggles as shown below. Then the tone burst

frequency will be changed.

...... Downward

......... 1750....... 2100...... 1000..... 1450......

.........................................................

[No.5] Clock Shift Setting

1. [SFT-OF] appears on the LCD.

2. Rotate the dial, and the display toggles as shown below. Then the setting of the

CLOCK will be changed.

..... Downward...... Upward.......

.........SFT-OF... SFT-ON...........

...........................................

[No.6] Busy Channel Lock Out Setting

1. [BCL-OF] appears on the LCD.

2. Rotate the dial, and the display toggles as shown below. Then the setting of the

BCLO will be changed.

...... Downward......Upward ..........

..........BCL-OF......BCL-ON..........

................................................

[No.7] TOT Penalty Time

1. [TP-OFF] appears on the LCD.

2. Rotate the dial, and the display toggles as shown below. The setting of TOT

penalty will be changed.

3. ** shows the current TOT penalty time.

The initial setting is 0 second. [TP-OFF] appears on the LCD.

4. Rotate the dial to change the TOT penalty time.

Upward......