Garmin 010-C0899-00 - MapSource TOPO - Alaska Посібник користувача - Сторінка 23

Переглянути онлайн або завантажити pdf Посібник користувача для Автомобільна навігаційна система Garmin 010-C0899-00 - MapSource TOPO - Alaska. Garmin 010-C0899-00 - MapSource TOPO - Alaska 30 сторінок. Software de mapeamento
Також для Garmin 010-C0899-00 - MapSource TOPO - Alaska: Посібник користувача (24 сторінок), Посібник користувача (2 сторінок), Посібник користувача (15 сторінок), Посібник користувача (28 сторінок), Посібник користувача (португальською) (30 сторінок)

Друкувати сторінку
Garmin 010-C0899-00 - MapSource TOPO - Alaska Посібник користувача

Creating and Editing Routes

Routes tell you how to get from one place to another.
Depending on your MapSource product, you can create
a direct route (a straight-line route), or an auto-route
(turn-by-turn over roads).

Creating Routes

You can create and modify routes in MapSource by
using the Route Properties dialog box, the Route tool
, or the Waypoints tab. A route can contain several
points; each point is called a via point.
NOTE: Not all MapSource products can create
an auto-route. You must be using a routable
MapSource product for MapSource to calculate an
auto-route.
MapSource User's Manual
u
M
s
>
sIng
ap
ource
To create a route using the Route Properties
dialog box:
1.
Press Ctrl + R or click Edit > New
open the Route Properties dialog box.
2. To add a city, point of interest, address, or
intersection, click the Find
inside the dialog box.
3. If you have previously created waypoints
and want to add them the route, click Insert
Waypoint. Select the waypoint from the list that
appears. To select multiple waypoints, press
the Ctrl or Shift key while you click several
waypoints. Then click OK.
4. Repeat steps 2–3 until you are finished adding
points to your route. Each point you add is
listed in order from first to last under the Via
Points tab.
5. To rearrange the points in the list, highlight each
point and click the arrows to move the point up
or down in the list. To reorder the points from
last to first, click Invert.
c
e
r
reatIng and
dItIng
outes
Route to
Places button