Brother 885-X03 Посібник з експлуатації - Сторінка 38
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Швейна машина Brother 885-X03. Brother 885-X03 48 сторінок.
Також для Brother 885-X03: Посібник з експлуатації (48 сторінок), Посібник з експлуатації (48 сторінок)
Друкувати сторінку
USING ATTACHMENTS AND APPLICATIONS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Gathering
Stitch Name
Pattern
Straight Stitch
(Left Needle Position)
Straight Stitch
(Center Needle
Position)
Loosen the tension of the upper thread so
1
that the lower thread lies on the underside
of the material.
Sew a single row (or many rows) of
2
straight stitches.
Pull the lower threads to gather the
3
material.
Darning
Stitch Name
Pattern
Straight Stitch
2
(Left Needle
Position)
Straight Stitch
3
(Center Needle
Position)
Turn off the machine.
1
Place the darning plate on the needle
plate, then turn on the machine.
37
Stitch Length
[mm (inch)]
2
4 (3/16)
3
4 (3/16)
Stitch
Length
Other
[mm (inch)]
Darning
Any
Plate
Darning
Any
Plate
Either remove both the presser foot and
2
presser foot holder assembly and then
lower the presser foot lever.
Put the section you want to darn under
3
the presser foot together with fabric for
reinforcement.
Turn on the machine.
4
Begin sewing by alternating between
5
gently drawing the work away from you
and pulling it toward you.
Note
● Sew while holding the fabric stretched in
order to keep the fabric held down.
Repeat this motion until the section being
6
darned is filled with parallel lines of
stitching.
Appliqués
Stitch Name
Pattern
4
Zigzag Stitch
5
Zigzag Stitch
6
Zigzag Stitch
You can create an appliqué by cutting a different piece
of fabric into a shape and applying it as a decoration.
Stitch
Stitch Width
Length
[mm (inch)]
[mm (inch)]
F-2
1.5 (1/16)
(1/64-1/16)
F-2
3.5 (1/8)
(1/64-1/16)
F-2
5 (3/16)
(1/64-1/16)