Brother MFC-J5330DW Довідковий посібник - Сторінка 27
Переглянути онлайн або завантажити pdf Довідковий посібник для Принтер "Все в одному Brother MFC-J5330DW. Brother MFC-J5330DW 34 сторінки. Mfc-j6930dw
Також для Brother MFC-J5330DW: Посібник з швидкого налаштування (2 сторінок), Посібник з безпеки продукції (20 сторінок)
Друкувати сторінку
Error Message
Touchscreen
Initialisation
Failed
Tray #1 Settings
Tray #2 Settings
MP Tray Settings
Unable to Clean
XX
Unable to
Initialize XX
Unable to Print
XX
Unable to Scan XX Disconnect the machine from the power for several minutes, and then
Unusable Device
Disconnect device
from front
connector & turn
machine off &
then on
Unusable Device
Please disconnect
USB device.
Action
The Touchscreen was pressed before the power on initialisation was
completed.
Make sure nothing is touching or resting on the Touchscreen,
especially when plugging the machine in.
Debris may be stuck between the lower part of the Touchscreen and
its frame.
Insert a piece of stiff paper between the lower part of the Touchscreen
and its frame and slide it back and forth to push out the debris.
This message is displayed when the setting to confirm the paper type
and size is enabled.
To not display this confirmation message, change the setting to Off.
For more information, see the Online User's Guide: Change the Check
Paper Size Setting.
A foreign object, such as a paper clip or a piece of ripped paper, is in
the machine.
Open the scanner cover and remove any foreign objects and paper
scraps from inside the machine. If the error message continues,
disconnect the machine from the power for several minutes, and then
reconnect it.
You can try additional paper jam clear operations.
For more information, see the Online User's Guide: Remove Paper
Scraps.
If you cannot print received faxes, transfer them to another fax
machine or to your computer.
For more information, see the Online User's Guide: Transfer Your
Faxes or Fax Journal Report.
reconnect it.
If you cannot print received faxes, transfer them to another fax
machine or to your computer.
For more information, see the Online User's Guide: Transfer Your
Faxes or Fax Journal Report.
A broken device is connected to the USB direct interface.
Unplug the device from the USB direct interface, then press
turn the machine off and then on again.
A USB device or USB flash drive that is not supported has been
connected to the USB direct interface.
Unplug the device from the USB direct interface. Turn the machine off
and then on again.
to
26