Brother DCP 540CN - Color Inkjet - All-in-One Посібник з швидкого налаштування - Сторінка 18
Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Принтер Brother DCP 540CN - Color Inkjet - All-in-One. Brother DCP 540CN - Color Inkjet - All-in-One 33 сторінки. Quick setup guide - french
Також для Brother DCP 540CN - Color Inkjet - All-in-One: Посібник з швидкого налаштування (32 сторінок), Посібник із швидкого старту (19 сторінок), (Французька) Посібник зі швидкого встановлення (33 сторінок)
Друкувати сторінку
STEP2
Installing the Driver & Software
12
Carefully route the USB cable through the
trench and out the back of the machine as
shown below and connect the cable to your
computer.
Improper Setup
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.
• Make sure that the cable does not restrict the
cover from closing, or an error may occur.
13
Lift the scanner cover to release the lock ( ).
Gently push the scanner cover support
down ( ) and close the scanner cover ( ).
14
Turn on the machine by connecting the power
cord.
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another. Please wait, it will
take a few seconds for all the screens to
appear.
Improper Setup
DO NOT try to cancel any of the screens during
this installation.
16
15
When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions.
16
Click Finish to restart your computer.
(After restarting the computer, for Windows
2000 Professional/XP/XP Professional x64
Edition, you must be logged on with
Administrator rights.)
Note
After restarting the computer, the Installation
Diagnostics will run automatically. If the
installation is unsuccessful, the installation results
window will be shown. If the Diagnostics shows a
failure, please follow the on-screen instructions or
read the on-line help and FAQs in
Start/All Programs (Programs)/Brother/
DCP-XXXX.
The MFL-Pro Suite has been installed and
the installation is now complete.
Note
• MFL-Pro Suite includes the Printer Driver,
Scanner Driver, Brother ControlCenter3,
®
®
ScanSoft
PaperPort
®
Type
fonts.
®
PaperPort
SE is a document management
application for scanning and viewing documents.
®
• Windows
XP Professional x64 Edition does not
support the Brother ControlCenter3 Modern user
interface (see the Software User's Guide located
on the CD-ROM for details).
®
Windows
®
SE with OCR and True