Brother DCP-373CW Посібник з швидкого налаштування - Сторінка 23

Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Принтер Brother DCP-373CW. Brother DCP-373CW 39 сторінок. Inkjet dcp/mfc
Також для Brother DCP-373CW: Перелік деталей для довідки (32 сторінок), Посібник з швидкого налаштування (29 сторінок)

For Wireless Network Users

Confirm your network environment (Infrastructure Mode)

The following instructions will offer two methods for installing your Brother machine in a wireless network

environment. Both methods are for infrastructure mode, using a wireless access point/router that uses DHCP to

assign IP addresses. Choose a configuration method and proceed to the page indicated.

If your wireless access point/router does not support SecureEasySetup™, Wi-Fi Protected Setup

or AOSS™, write down the wireless network settings of your wireless access point/router in the

area below.

IMPORTANT

If you do not know this information (Network Name (SSID/ESSID), and Password), you cannot

continue the wireless setup. You should see the documentation provided with your wireless

access point/router, consult the router manufacturer, or your system administrator.

Item

Network Name: (SSID/ESSID)

Password

Your Brother machine supports the use of the first WEP KEY only. If you are using a router that is using

more than one WEP KEY enter the KEY used for the first WEP KEY.

Now go to

If your wireless access point/router supports automatic wireless (one-push) setup

(SecureEasySetup™, Wi-Fi Protected Setup or AOSS™)

Now go to

Record the current wireless network settings

page 24

page 25