Fujitsu A6210 - LifeBook - Core 2 Duo 2.26 GHz Посібник з біосу - Сторінка 21
Переглянути онлайн або завантажити pdf Посібник з біосу для Ноутбук Fujitsu A6210 - LifeBook - Core 2 Duo 2.26 GHz. Fujitsu A6210 - LifeBook - Core 2 Duo 2.26 GHz 26 сторінок. Fujitsu lifebook a6210: quick start
Також для Fujitsu A6210 - LifeBook - Core 2 Duo 2.26 GHz: Початок роботи (2 сторінок)
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security submenu is for configuring hard disk security features.
Drive0 password is:
Password Entry on Boot:
* Hard disk password cannot be set or changed
F1
ESC
Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field
Options
Drive0:
___
Set Master
___
Password:
Set User
___
Password:
■
Password Entry on
Disabled
Boot:
■
Enabled
Phoenix SecureCore(tm) Setup Utility
Info
System
Advanced
Hard Disk Security
Set Drive0 Password
if the system is booted from the OS. Choose
Save Changes and Power Off in exit menu to
shut down the system, then hard disk password
will be set or changed on next boot.
Help
Select Item
Exit
Select Menu
Figure 14. Hard Disk Security Submenu
Default
Description
Clear
Display-only. Default is Clear. When the Drive0 Password has been set, the field
changes to Set. When this password is set, the primary hard disk drive cannot be
used in another system unless the password is entered.
[Enter]
Sets, changes or cancels the Master Password. The Master Password may be up to
seven characters long and must include only letters or numbers (no symbols). Pass-
words are NOT case-sensitive. When a Master Password is set, it must be used to
access the hard drive if it is used in another system. Note that the password will not
take effect until the system has been rebooted.
[Enter]
Sets, changes or cancels the User Password. The User Password may be up to seven
characters long and must include only letters or numbers (no symbols). Passwords
are NOT case-sensitive. When aUser Password is set, it must be used to access the
hard drive if it is used in another system. Note that the password will not take effect
until the system has been rebooted.
[Enabled]
When set to disabled, entry of a Hard Disk Password is not required before OS boot.
(The hard disk is still password-protected without password entry.)
Security
Boot
Clear
[Enter]
[Enabled]
-/Space
Change Values
Enter
Select
Sub-Menu
S e c u r i t y M e n u
Exit
Item Specific Help
F9
Setup Defaults
F10
Save and Exit
21