AEG L 87406 FL Посібник користувача - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник користувача для Пральна машина AEG L 87406 FL. AEG L 87406 FL 28 сторінок. Clothes washer
Друкувати сторінку10 www.aeg.com
L
4.4 Start/Pause button
Press button
programme.
4.5 Delay start button
Press button
programme from 30 minutes to 20 hours.
4.6 Time save button
Press button 6 to decrease the duration
of the programme.
– Press one time to set 'Shortened dura-
tion' for items with daily soil.
– Press two times to set 'Extra Quick' for
items with light soil.
Some programmes accept only
one of the two functions.
4.7 Extra rinse button
Press button
a programme.
Use this function for persons allergic to
detergents and in areas where the water
is soft.
4.8 Stain-Prewash button
Press button
a prewash phase to a programme.
Press the button again and again to acti-
vate one or two options. The related
symbol and the indicator bar comes on
in the display.
STAIN
• Use this function for laundry with hard
stains to remove.
The indicator bar is fully filled when you set to the maxi-
mum number of rinses.
The Stain symbol comes on when you activate the function.
The Prewash symbol comes on when you activate the func-
tion.
The indicator bar is not fully filled when you set only one of
the functions.
The indicator bar is fully filled when you set the two func-
tions.
4
4
to start or interrupt a
5
to delay the start of a
5
6
7
7
to add rinsing phases to
to add the stain and/or
8
When you set this function, put the
stain remover into compartment
This function increases the pro-
gramme duration.
This function is not available with
a temperature lower than 40° C.
PREWASH
• Use this function to add a prewash
phase before the washing phase. We
recommend that you use this function
when you have laundry with a high lev-
el of soil.
The set of this function increases
the programme duration.
4.9 Spin button
Press this button to:
• Decrease the maximum speed of the
spin phase of the programme.
The display shows only the spin
speeds available with the set
programme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the wa-
ter when the programme is comple-
ted.
8
4.10 Temperature button
Press button
temperature. When the display shows
- -, the appliance does not heat the wa-
ter.
4.11 Acoustic signals function
You can hear the acoustic signals when:
9
to change the default
10
.
10