Fujitsu ScanSnap S300 Посібник для початківців - Сторінка 34
Переглянути онлайн або завантажити pdf Посібник для початківців для Сканер Fujitsu ScanSnap S300. Fujitsu ScanSnap S300 37 сторінок. Color image scanner
Також для Fujitsu ScanSnap S300: Процедури встановлення (3 сторінок), Специфікація (2 сторінок), Інструкції з очищення (2 сторінок)
Друкувати сторінку
5.3 Cleaning Inside of the Scanner
Clean inside of the scanner with a cloth moistened with Cleaner F1.
In an alternating succession of scanning documents, the accumulated paper-powder and
dust inside the scanner causes a scanning error.
As a guideline, clean the ADF every 200 sheets of documents. Note that this guideline
varies according to the type of documents you are scanning. For example, the ADF must
be cleaned more frequently when scanning documents on that the toner has not been
sufficiently fixed on.
Clean the ADF according to the following procedure referring to the illustrations.
ATTENTION
1.
Open the ADF while pulling the Cover open lever.
Cover open lever
2.
Clean the following locations with a cloth moistened with Cleaner F1.
33
• Never use water or neutral detergent to clean the inside of the scanner.
• Do not use aerosol sprays to clean the scanner. Aerosol sprays cause dirt
and dust to enter the scanner, resulting in the scanner failure, malfunction
and image error.
ADF
Cloth
Cleaner F1 or
neutral detergent
Paint thinner