Brother HL-4570CDWT Безпека та законність - Сторінка 2

Переглянути онлайн або завантажити pdf Безпека та законність для Сервер друку Brother HL-4570CDWT. Brother HL-4570CDWT 21 сторінка. Printer
Також для Brother HL-4570CDWT: Посібник з швидкого налаштування (29 сторінок), Посібник користувача (20 сторінок), Посібник (25 сторінок)

Compilation and Publication

Under the supervision of Brother Industries, Ltd., this manual has been compiled and published,

covering the latest product descriptions and specifications.

The contents of this manual and the specifications of this product are subject to change without

notice.

Brother reserves the right to make changes without notice in the specifications and materials

contained herein and shall not be responsible for any damages (including consequential) caused

by reliance on the materials presented, including but not limited to typographical and other errors

relating to the publication.

Put your product on a flat, level, stable surface that is free of vibration and shocks, such as a desk.

Put the product near a telephone wall jack and a standard grounded AC power outlet. Choose a

location where the temperature remains between 50°F and 90.5°F (10°C and 32.5°C) and the

humidity is between 20% to 80% (without condensation).

WARNING

DO NOT expose the product to direct sunlight, excessive heat, open flames, salty or corrosive

gasses, moisture or dust. Doing so may create a risk of an electrical short or fire. It may also

damage the product and/or render it inoperable.

DO NOT place the product near heaters, air conditioners, electrical fan, refrigerators, or water.

Doing so may create the risk of a short circuit or fire, should water come into contact with the

product (including condensation caused by heating/air conditioning/ventilation equipment).

DO NOT place the product near chemicals. Should the chemicals come into contact with the

product, there may be a risk of fire. The chemicals may also cause the product to malfunction

or become discolored.

DO NOT put the product in a location where any slot or opening in the product is obstructed or

blocked. These slots and openings are provided for ventilation. Blocking the product's

ventilation could create a risk of overheating and/or fire.