Fujitsu ETERNUS DX8000 series Посібник з конфігурації - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник з конфігурації для Зберігання Fujitsu ETERNUS DX8000 series. Fujitsu ETERNUS DX8000 series 17 сторінок.
Друкувати сторінку
This manual briefly explains the operations that need to be performed by the user in order to connect an
ETERNUS DX410/DX440 or an ETERNUS DX8100/DX8400/DX8700 Disk storage system to a server running
Solaris OS, HP-UX, Windows®, Linux, VMware ESX, or Oracle VM Server via an iSCSI interface.
This manual should be used in conjunction with other applicable user manuals, such as those for the ETERNUS
DX410/DX440 or ETERNUS DX8100/DX8400/DX8700 Disk storage system, server, OS, iSCSI HBAs, LAN cards,
and drivers.
Refer to "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Notations" for the notations
used in this manual such as product trademarks and product names.
This manual references the following document:
•
ETERNUSmgr User Guide
Also, note that in this manual the ETERNUS DX410/DX440, ETERNUS DX8100/DX8400/DX8700 Disk storage
systems are referred to as ETERNUS DX.
The Contents and Structure of this Manual
This manual is composed of the following two chapters.
●
Chapter 1 Workflow
This describes the workflow when setting up an ETERNUS DX.
●
Chapter 2 ETERNUS DX Connection Settings
This describes the settings used when connecting an ETERNUS DX.
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2014 FUJITSU LIMITED
3
Preface
Eighth Edition
December 2014
P3AM-3972-08ENZ0