Brother MFC-9450CDN Посібник з швидкого налаштування - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Сервер друку Brother MFC-9450CDN. Brother MFC-9450CDN 34 сторінки. Facsimile equipment
Також для Brother MFC-9450CDN: Перелік деталей для довідки (43 сторінок), Чистка та догляд (7 сторінок)
Друкувати сторінку
STEP 1
Setting Up the Machine
2
While pressing the green paper-guide release
lever (1), slide the paper guides to fit the paper
size. Make sure that the guides are firmly in the
slots.
3
Fan the stack of paper well to avoid paper jams
and misfeeds.
4
Put paper in the paper tray. Make sure that the
paper is flat in the tray and below the maximum
paper mark.
5
Put the paper tray firmly back into the machine.
6
4
1
(1)
2
3
4
Note
Make sure the telephone line cord is connected to
the jack labeled LINE and not the EXT. jack.
Install the power cord and
phone line
Make sure that the machine's power switch is
off. Remove the label covering the AC power
inlet.
Connect the AC power cord to the machine.
Plug the AC power cord into an AC outlet. Turn
the power switch on.
Connect one end of the telephone line cord to
the jack on the machine marked LINE and the
other end to a modular wall jack.