Fujitsu SDLT 160 GBYTE Посібник з експлуатації - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Зберігання Fujitsu SDLT 160 GBYTE. Fujitsu SDLT 160 GBYTE 15 сторінок.
Друкувати сторінку
SDLT 160/320 GBYTE
Connection for RS-422 (loader)
The connector is not in use.
Termination/terminating resistor
The required bus connection is always located on the end of the cable. The drive has no terminating
resistors of its own.
Installing the streamer
The streamer requires a 5 ¼" mounting location of full height. It can be installed horizontally or
vertically.
When mounting the streamer, ensure that the ventilation slits on the streamer are kept
!
free.
Ê
Install the streamer as described in the Operating Manual or Technical Manual for the
computer.
Connecting the streamer
The ports can be found on the rear of the streamer.
Ê
Plug the power supply cable (4-pin) into the power supply socket of the streamer (1).
Ê
Plug the Wide SCSI cable (68-pin) into the Wide SCSI interface of the streamer (2).
6 - English
1
2
A26361-H814-Z100-1-7419