A-Neu Video HD-88K Інструкція з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Матричний комутатор A-Neu Video HD-88K. A-Neu Video HD-88K 20 сторінок.

A
NEUVIDEO
FRONT PANEL - EDID, MEMORY & RECALL
o
FUNCTION KEY - EDID:
a
FUNCTION KEY - RECALL:
s
FUNCTION KEY - MEMORY:
Used to display change current EDID mode.
- Press EDID to select new EDID mode or select
- Press SOURCE row #1 or #2 Select EDID modes.
- Press ENTER to ready memory location.
- Or press EDID again to cancel operation.
Operation completes.
Note : Operation will abort if no keys are pressed within 5 seconds.
The system will show previously stored presets, up to a total of 16. Presets are stored in
local memory using Source keys 1 thru 8 or Destination keys 1 thru 8 as the memory preset
location.
- Press RECALL button.
- Press 1 THRU 8 on either Source or Destination row.
- Press ENTER. The pre-set configuration will execute.
Operation completes.
Note : Operation will abort if no keys are pressed with 5 seconds.
- Or press RECALL again to cancel operation.
The system will show store presets, up to a total of 16. Presets are stored in local memory
using Source keys 1 thru 8 or Destination keys 1 thru 8 as the memory preset location.
- Configure desired matrices..
- Press MEMORY button.
- Press 1 THRU 8 on either Source or Destination row.
- Press ENTER to ready memory location.
- Or press MEMORY again to cancel operation.
Operation completes.
Note : Operation will abort if no keys are pressed within 5 seconds.
- Or press MEMORY again to cancel operation.
5
FRONT PANEL