AEG A75298-SK1 Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Морозильна камера AEG A75298-SK1. AEG A75298-SK1 48 сторінок.

After cleaning, reconnect the equipment to the mains supply.

Cleaning the ventilation grille

The ventilation grille can be removed for washing.

Make sure the door is open and then:

1. Loosen the upper edge of the grille by pulling outward/downward.

2. Pull the grille straight out to completely remove it.

3. Vacuum clean under the cabinet.

The freezer compartment of this model, on the other hand, is a "no frost" type. This means

that there is no buildup of frost when it is in operation, neither on the internal walls nor

on the foods.

The absence of frost is due to the continuous circulation of cold air inside the compartment,

driven by an automatically controlled fan.

When the appliance is not in use for long periods, take the following precautions:

1. disconnect the appliance from electricity supply

2. remove all food

3. clean the appliance and all accessories

4. leave the door/doors open to prevent unpleasant smells.

If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food

inside from spoiling in case of a power failure.

What to do if...

During operation of the appliance some smaller but annoying trouble can often occur,

which does not require calling a technician out. In the following chart information is given

about them to avoid unnecessary charges on service.

The operation of the appliance goes with certain sounds (compressor and circulating

sound). This not means a trouble, but a normal operation.

The appliance operates discontinuously, so the stopping of compressor does not mean being

no current. That is why you must not touch the electrical parts of the appliance before

breaking the circuit.

Problem

The appliance is noisy.

Possible cause

The appliance is not supported

properly.

The cushion spacers located be-

tween the back of the cabinet

and the pipes come loose.

Solution

Check if the appliance stands sta-

ble (all feet and wheels should be

on the floor). Refer to "Levelling".

Put them back in place again.