AEG OKO-ARCTIS Інструкція з експлуатації Посібник з експлуатації - Сторінка 16

Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Морозильна камера AEG OKO-ARCTIS. AEG OKO-ARCTIS 22 сторінки. Table top freezer
Також для AEG OKO-ARCTIS: Інструкція з експлуатації Посібник з експлуатації (24 сторінок)

Друкувати сторінку

Each temperature rise reduces the keeping qualities of your frozen

food. Around 12 hours before defrosting your freezer, switch over to

fast freeze to built up a low temperature reserve in the frozen food.

Warning!

• Do not use electrical heating appliances or any other mechanical or

artificial devices to speed up the defrosting process.

• Do not use defrosting sprays, they can be hazardous to your health

and/or contain substances that damage plastics.

Caution! Do not touch frozen food with wet hands. Your hands could

freeze to the food.

Remove frozen food, wrap it in several layers of newspaper and store it,

covered, in a cool place.

Switch off the appliance and unplug

it, or pull the fuse or switch off the

circuit breaker.

Remove all drawers except the bot-

tom one. The bottom drawer serves

as a practical container to collect the

water from the thawing ice. Pull out

the drawer and insert the plastic

scraper in the special location to act

as an extension channel to collect

the defrost water.

Tip: To speed up the defrosting pro-

cess, place a pan with hot water in the appliance and close the door.

Remove pieces of ice that have fallen before they completely defrost.

After defrosting, thoroughly clean the freezer compartment and interi-

or fittings.

Warning!

• The appliance may not be connected to the mains during cleaning.

Danger of electrical shock! Before cleaning switch the appliance off

and remove the plug from the mains, or switch off or turn out the

circuit breaker or fuse.

• Never clean the appliance with a steam cleaner. Moisture could accu

mulate in electrical components, danger of electrical shock! Hot

vapours can lead to the damage of plastic parts.

• The appliance must be dry before it is placed back into service.