A-Neuvideo HD-22 Інструкція з експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Матричний комутатор A-Neuvideo HD-22. A-Neuvideo HD-22 12 сторінок. 2x2 hdmi matrix switcher

Друкувати сторінку

RS-232 SERIAL INTERFACE CONNECT a PC or CONTROL SYSTEM. VERSION COMPATIBLE

RS-232

The switcher can be controlled via the RS-232 serial control port to allow for interfacing to a PC, or similar third party control system.

The serial communication parameters are 9600 baud, 8 bit, No Parity and 1 stop bit - this is often referred to as 9600 8N1.

When the unit recognizes a complete command it will perform the requested action - there is no delimiter character required.

The unit does not send out a message when a value is changed from the front panel or by IR control. If the unit needs to be controlled

via the front panel in addition to the RS-232 control, you should regularly poll the unit status to ensure the control system accurately

reﬂ ects the current settings.

COMMANDS

To Switch Inputs to Outputs

- Where X is Input Number (1-2) and Y is Output Number (1-2)

SBI0XO0Y

Unit will respond with

- Where X is Input Number (1-2) and Y is Output Input Number (1-2)

SBUD0XOY

Example : Send Input 1 to Output 2

- Send

SBI01O02

- Rcvd

SBUD01O2

RS-232 SERIAL INTERFACE

RS-232

--------

GND

--------

Deﬁ nition

Not used

Transmitter

Receiver

Not used

Ground

Not used