A-Neuvideo ANI-2PIP-LOGO Інструкція з експлуатації - Сторінка 10
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Монітор A-Neuvideo ANI-2PIP-LOGO. A-Neuvideo ANI-2PIP-LOGO 20 сторінок. 2x1 hdmi multiviewer
Також для A-Neuvideo ANI-2PIP-LOGO: Інструкція з експлуатації (15 сторінок)
Друкувати сторінку
A
NEUVIDEO
RS-232 Commands
COMMAND
SET IN N1 FORMAT N2 8
GET IN N1 FORMAT 8
SET IN N1 TEMPERATURE N2 8
GET IN N1 TEMPERATURE 8
SET IN N1 CHROMA N2 8
GET IN N1 CHROMA 8
SET CHROMAKEY ENABLE N1 8
GET CHROMAKEY ENABLE 8
SET CHROMAKEY COLOR N1 8
GET CHROMAKEY COLOR 8
SET CHROMAKEY RED RANGE N1 TO
N2 8
SET CHROMAKEY GREEN RANGE N1
TO N2 8
SET CHROMAKEY BLUE RANGE N1
TO N2 8
DESCRIPTION & PARAMETERS
Force input N1 to use a specific color format.
N1 = 1 ~ 2
[Input port]
Available values for N2:
1
[RGB]
2
[YPbPr 4:2:2]
3
[YPbPr 4:4:4]
Show the currently set color space format used by input N1.
N1 = 1 ~ 2
[Input port]
Set the color temperature to use with input N1.
N1 = 1 ~ 2
[Input port]
Available values for N2:
1
[6500K]
2
[9300K]
Show the currently set color temperature used by input N1.
Set the chroma value for input N1.
N1 = 1 ~ 2
[Input port]
N2 = 0 ~ 100
[Chroma value]
Show the current chroma value for input N1.
N1 = 1 ~ 2
[Input port]
Enable or disable Chromakey mode.
Available values for N1:
0
[Off]
1
[On]
Show the current state of the Chromakey mode.
Select the RGB chromakey preset to use when Chromakey mode is enabled.
Available values for N1:
WHITE
[White key]
BLACK
[Black key]
RED
[Red key]
GREEN
[Green key]
YELLOW
[Yellow key]
BLUE
[Blue key]
MAGENTA
[Magenta key]
CYAN
[Cyan key]
USER
[User defined key]
Show the currently selected RGB chroma preset.
Set the key-out range to use for the red component of the User defined key.
N1= 00 ~ FF
[Red min in hex]
N2= 00 ~ FF
[Red max in hex]
Set the key-out range to use for the green component of the User defined key.
N1= 00 ~ FF
[Green min in hex]
N2= 00 ~ FF
[Green max in hex]
Set the key-out range to use for the blue component of the User defined key.
N1= 00 ~ FF
[Blue min in hex]
N2= 00 ~ FF
[Blue max in hex]
8
RS-232 & Telnet Commands