Kohler VINTAGE K-700 Посібник з монтажу та догляду - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з монтажу та догляду для Ванни Kohler VINTAGE K-700. Kohler VINTAGE K-700 25 сторінок. Roughing-in guide
Також для Kohler VINTAGE K-700: Інструкція з монтажу Посібник з монтажу (9 сторінок), Посібник з монтажу (21 сторінок), Посібник з чорнової обробки (4 сторінок), Посібник (4 сторінок)

Prepare the Site

Drop-In or Raised-Deck Installations

Installations encastrées ou sur podium.

Instalaciones de sobreponer o en cubierta elevada

Provide a 1/16" (2 mm) gap between the bath rim

and the framing.

Fournir un espace de 1/16" (2 mm) entre le rebord

de la baignoire et le cadrage.

Provea una separación de 1/16" (2 mm) entre el

borde de la bañera y la estructura de postes de

madera.

Flooring

NOTICE: Adequate ﬂoor support must be provided. Consult the rough-in guide

packed with the bath for speciﬁc ﬂoor loading requirements.

Install adequate ﬂoor support.

NOTICE: To ensure a successful installation, it is critical that the bath be installed on

a level subﬂoor.

Verify the subﬂoor is level. Adjust for level, if necessary.

For freestanding installations, apply water-resistant sealant to the subﬂoor. This

will reduce the risk of water damage.

Framing

For drop-in or raised-deck installations:

CAUTION: Risk of property damage. Do not support the bath by the rim. The

bath must be supported by the feet only.

NOTICE: To ensure the bath does not rest on the rim, a 1/16" (2 mm) gap must exist

between the underside of the rim and the framing. When constructing the framing,

take into account the 1/16" (2 mm) gap and the thickness of the ﬁnished wall/deck

material. If these factors are not taken into account, the bath will not ﬁt in the

installation area.

Construct the framing according to the roughing-in information packed with the

bath. Ensure a 1/16" (2 mm) gap will exist between the underside of the rim and

the framing.

Kohler Co.

1084188-2-A