Avsl 160.462UK Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Ді-джейське обладнання Avsl 160.462UK. Avsl 160.462UK 6 сторінок. Bubble/haze machine

Troubleshooting

Warning: Hot components! ... Switch off and allow to cool before touching the unit.

No light on mains

switch

Ready light stays off

Ready light is on but

no haze output on

manual or

continuous

No haze output on

timer function

No bubble output

Disposal: The "Crossed Wheelie Bin" symbol on the product means that the product is classed as Electrical or

Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful

life. The goods must be disposed of according to your local council guidelines

Check mains voltage is correct and socket is switched on

Check IEC lead is OK and connected properly

Check mains fuse in IEC connector and fuse in plug top

If fuse blowing repeatedly, refer to qualified service personnel

Check remote is connected properly

If light is permanently off, refer to qualified service personnel

Check fog fluid level

If fluid is OK and pump working, the lines may be blocked

Check that nozzle is not blocked or obstructed

If blocked, clean with fog machine cleaner & distilled water

Ensure timer button is pressed in and timer LED is lit

Check interval, duration and output control settings – test manually if necessary

Ensure bubble fluid level is enough to cover the wands as they turn through the bath

Check bubble wand wheel is turning – press button on keyfob remote to activate

If keyfob remote doesn't work, check button cell inside and replace if necessary

Check that the wireless receiver is plugged in correctly

Errors and omissions excepted.

160.462UK User Manual