Dell C600 - Latitude Intel P-4 1.4GHz Посібник з експлуатації - Сторінка 37
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Ноутбук Dell C600 - Latitude Intel P-4 1.4GHz. Dell C600 - Latitude Intel P-4 1.4GHz 48 сторінок. Latitude c600/c500 series
Також для Dell C600 - Latitude Intel P-4 1.4GHz: Посібник з експлуатації (46 сторінок)
Друкувати сторінку
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Manual
Removing the Microprocessor Module
NOTICE:
Disconnect the computer and any attached devices from electrical outlets, and remove
any installed batteries.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching an
unpainted metal surface on the computer.
NOTICE:
Read
procedure.
1. Remove the
hard
2. Remove the
keyboard
NOTICE:
To ensure maximum cooling for the microprocessor, do not touch the heat transfer areas
on the thermal cooling assembly. The oils in your skin reduce the heat transfer capability of the
thermal pads.
3. Remove the
microprocessor thermal cooling
NOTICE:
When removing the microprocessor module, pull the module straight up. Be careful not
to bend the pins on the microprocessor module.
4. Remove the microprocessor module.
NOTICE:
To avoid damage to the microprocessor, hold the screwdriver so that it is perpendicular
to the microprocessor when removing the cam screw (see
a. Use a small flat-head screwdriver and rotate the ZIF socket cam screw counter-clockwise 180
degrees to loosen the ZIF socket.
The ZIF socket cam screw secures the microprocessor assembly to the system board assembly.
Take note of the arrow on the ZIF socket cam screw (see
NOTE:
Your system has a type I or type II ZIF socket.
b. Use a microprocessor extraction tool to remove the microprocessor module.
Replacing the Microprocessor Module
NOTICE:
Seating the microprocessor module properly in the ZIF socket does not require force.
file:///F|/Service%20Manuals/Dell/Latitude/c500-600/remove.htm (30 of 40) [2/28/2004 7:53:33 AM]
"Preparing to Work Inside the
drive.
assembly.
Computer" before performing the following
assembly.
"Microprocessor
"Microprocessor
Modules").
Modules").