Dell Force10 S2410-01-10GE-24P Посібник - Сторінка 19
Переглянути онлайн або завантажити pdf Посібник для Сервер Dell Force10 S2410-01-10GE-24P. Dell Force10 S2410-01-10GE-24P 42 сторінки. Installing the s2410 system
Також для Dell Force10 S2410-01-10GE-24P: Примітка до заявки (6 сторінок), Посібник із швидкого старту (31 сторінок)
Друкувати сторінку
Four-Post Rack-mounting with Cage Nuts
Ensure that there is adequate clearance surrounding the cabinet or rack to permit access and airflow. If
you are installing two S2410 systems side-by-side, position them at least 5 inches (12.7 cm) apart.
Attach the rack ears first, using only the supplied screws (see
then follow the steps below to install the S2410 chassis into a four-post rack mounting with cage nuts.
Step
Task
Attach the two rear brackets to the side panels. Align the three holes in the bracket with the three holes on the
1
S2410 chassis, and secure the brackets to the chassis using the screws.
Figure 4-6. Four-post Rack-mounting with Cage Nuts, Step 1
Align and secure the adjustable bracket onto the rear bracket.
2
Insert the S2410 chassis into the rear of the rack. Position and secure the chassis with two screws into each front
3
bracket flange and into the rack post.
Figure 4-7. Four-post Rack-mounting with Cage Nuts, Step 3
Attaching the Rack Ears on page
Top View of Brackets
15), and
Align brackets
Installing the S2410
|
19