Dell PowerEdge 1650 Посібник користувача - Сторінка 25

Переглянути онлайн або завантажити pdf Посібник користувача для Сервер Dell PowerEdge 1650. Dell PowerEdge 1650 34 сторінки. Installing an era/o card
Також для Dell PowerEdge 1650: Інструкція з експлуатації (6 сторінок), Інформаційне оновлення (44 сторінок), Інформаційне оновлення (44 сторінок), Посібник з монтажу (44 сторінок), Посібник з монтажу (44 сторінок), Посібник з монтажу (44 сторінок), Посібник з монтажу (44 сторінок), Посібник (15 сторінок), Посібник з монтажу (44 сторінок)

Dell PowerEdge 1650 Посібник користувача
NOTE:
Dell may require lamps replaced under warranty to be
returned to Dell. Otherwise, contact your local waste disposal agency
for the address of the nearest deposit site.
Replace with the new lamp.
6
Tighten the screw that secures the lamp.
7
Replace the top cover and tighten the screw.
8
Reset the lamp usage time by selecting "Yes" for Lamp Reset in the OSD
9
Power Settings of the Advanced Settings menu. When a new lamp
module has been changed, the projector will automatically detect and
reset the lamp hours.
CAUTION:
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST
BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE,
OR FEDERAL LAWS. FOR MORE INFORMATION, GO TO
WWW.DELL.COM/HG OR CONTACT THE ELECTRONIC INDUSTRIES
ALLIANCE AT WWW.EIAE.ORG. FOR LAMP-SPECIFIC DISPOSAL
INFORMATION, CHECK WWW.LAMPRECYCLE.ORG.
Lamp Disposal (for the US only)
Maintenance
25