Dell E177FP - 17" LCD Monitor Посібник користувача - Сторінка 26
Переглянути онлайн або завантажити pdf Посібник користувача для Монітор Dell E177FP - 17" LCD Monitor. Dell E177FP - 17" LCD Monitor 30 сторінок. Dell e157fp: specifications
Також для Dell E177FP - 17" LCD Monitor: Посібник з швидкого налаштування (2 сторінок), Технічні характеристики (4 сторінок)
Друкувати сторінку
Missing Pixels
Stuck-on Pixels
Brightness Problems
Geometric Distortion
Horizontal/Vertical Lines
Sync Problems
LCD Scratched
Safety Related Issues
Intermittent Problems
Missing Color
Wrong Color
Product Specific Problems
SPECIFIC SYMPTOMS
Screen image is too small
Cannot adjust the
monitor with the
buttons on the front
panel
The monitor will not go
into power saving
mode.
Downloaded from ManualMonitor.com Manuals
LCD screen has spots
LCD screen has bright spots
Picture too dim or too bright
Screen not centered correctly
Screen has one or more lines
Screen is scrambled or appears torn
Screen has scratches or smudges
Visible signs of smoke or sparks
Monitor malfunctions on & off
Picture missing color
Picture color not good
WHAT YOU
POSSIBLE SOLUTIONS
EXPERIENCE
Image is
Perform monitor reset on "All Settings"
l
centered on
screen, but
does not fill
entire
viewing area
OSD does
Turn the monitor off and unplug the power cord and then plug back and power on
l
not appear
on the
screen
No picture,
Move mouse or hit any key on the keyboard on the computer or activate video player, then
l
the LED light
access the OSD to set both Audio/Video to " off " state.
is green.
When press
"+", "-" or
"Menu" key,
the message
" No input
Adjust Phase and Clock controls through OSD
l
Perform monitor reset
l
Check environmental factors
l
Relocate and test in another room
l
Cycle power on-off
l
These are pixels that are permanently off and is a natural defect that occurs in LCD
l
technology
Cycle power on-off
l
These are pixels that are permanently on and is a natural defect that occurs in LCD
l
technology
Perform monitor reset on "All Settings"
l
Press Auto Adjust button
l
Adjust brightness & contrast controls
l
Perform monitor reset on "Position Settings Only"
l
Press auto-adjust button
l
Adjust the centering controls
l
Ensure monitor is in proper video mode
l
Perform monitor reset on "All Settings"
l
Press Auto Adjust button
l
Adjust Phase and Clock controls via OSD
l
Perform monitor self-test feature check and determine if these lines are also in
l
self-test mode
Check for bent or broken pins
l
Perform monitor reset on "All Settings"
l
Press Auto Adjust button
l
Adjust Phase and Clock controls via OSD
l
Perform monitor self-test feature check to determine if scrambled screen appears
l
in self-test mode
Check for bent or broken pins
l
Boot up in the "safe mode"
l
Turn monitor off and clean the screen
l
For cleaning instruction, see
Caring for your
l
Do not perform any troubleshooting steps
l
Monitor needs to be replaced
l
Ensure monitor is in proper video mode
l
Ensure video cable connection to computer and to the flat panel is secure
l
Perform monitor reset on "All Settings"
l
Perform monitor self-test feature check to determine if the intermittent problem
l
occurs in self-test mode
Perform monitor self-test feature check
l
Check connection integrity at both end of the video cable
l
Check for bent or broken pins
l
Change the color to "User Preset"
l
Adjust R/G/B value of "User Preset"
l
Monitor.