Dell UltraSharp UP3218K Посібник з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Монітор Dell UltraSharp UP3218K. Dell UltraSharp UP3218K 14 сторінок.
Також для Dell UltraSharp UP3218K: Посібник користувача (50 сторінок), Посібник із швидкого старту (2 сторінок), Посібник із швидкого старту (2 сторінок), Посібник з демонтажу (6 сторінок)

Dell UltraSharp UP3218K Посібник з експлуатації
4.2 Assembly Procedures:
Place a bracket chassis base on a protective
S1
cushion, then stick two Silicon sheets on the
positions as the picture below shown.
Take a AC board and a cable, connect the cable to
the AC board, then locate the AC board into the
S2
bracket as the following picture shown.
Take a power board, Connect the cable to the
board, then turn over the power board and locate
the correct position. Use a Philips-head screwdriver to
tighten 7 screws for locking the power board and AC
S3
board, then Insert a piece of mylar tape to the hooks of
bracket to cover the power board.
(No.1 screw size=M4x8, Torque=7~8kgfxcm;
No.2~7 screw size=M3x7.5, Torque=7~8kgfxcm;
4. Disassembly and Assembly Procedures
power
2
4
5
3
6
1
7
Take a interface board, LED driver board and some
cables, connect the LVDS cables to the connectors
of the interface board. Take the interface board close
to the power board, then connect the power board
with the interface board, connect the LED driver
S4
board with the power board. Turn over the interface
board, LED driver board and locate them into the
hooks of the bracket chassis base. Use a Philips-
head screwdriver to tighten 4 screws for locking the
interface board and LED driver board.
(No.8~11 screw size=M3x7.5, Torque=7~8kgfxcm)
it into
Turn over the bracket chassis base. Connect cable
to the a Stand LED board, then locate the stand LED
board to the correct position. Use a
screwdriver to tighten
S5
stand LED board. Use a
tighten
(No.1~2 screw size=M3x4.5, Torque=7~8kgfxcm,
No.3~4 screw size=M3x10, Torque=6~8kgfxcm)
8
9
10
11
two screws for locking the
Philips-head screwdriver to
two screws for locking the AC power outlet.
1
2
4
3
Philips-head
13