Dell EMC VxFlex Ready Node R840 Посібник користувача - Сторінка 33
Переглянути онлайн або завантажити pdf Посібник користувача для Зберігання Dell EMC VxFlex Ready Node R840. Dell EMC VxFlex Ready Node R840 44 сторінки.
Друкувати сторінку
Table 24 System health and system ID indicator codes
System health and system ID indicator code
Solid blue
Blinking blue
Solid amber
Blinking amber
iDRAC Quick Sync 2 indicator codes
The iDRAC Quick Sync 2 module (optional) is located on the left control panel of your system.
Figure 6 iDRAC Quick Sync 2 indicators
Table 25 iDRAC Quick Sync 2 indicators and descriptions
iDRAC Quick Sync 2 indicator
code
Off (default state)
Solid white
Blinks white rapidly
Blinks white slowly
Blinks white five times rapidly and
then turns off
Condition
Indicates that the iDRAC Quick Sync 2
feature is turned off. Press the iDRAC
Quick Sync 2 button to turn on the iDRAC
Quick Sync 2 feature.
Indicates that iDRAC Quick Sync 2 is
ready to communicate. Press the iDRAC
Quick Sync 2 button to turn off.
Indicates data transfer activity.
Indicates that firmware update is in
progress.
Indicates that the iDRAC Quick Sync 2
feature is disabled.
Condition
Indicates that the system is turned on, the system is healthy, and
system ID mode is not active. Press the system health and system
ID button to switch to system ID mode.
Indicates that the system ID mode is active. Press the system
health and system ID button to switch to system health mode.
Indicates that the system is in fail-safe mode. If the problem
persists, see
Getting help
on page
Indicates that the system is experiencing a fault. Check the
System Event Log or the LCD panel, if available on the bezel, for
specific error messages.
Corrective action
If the LED fails to turn on, reseat the left control
panel flex cable and check. If the problem persists,
see "Getting help."
If the LED fails to turn off, restart the system. If
the problem persists, see
If the indicator continues to blink indefinitely, see
Getting help
If the indicator continues to blink indefinitely, see
Getting help
Check if iDRAC Quick Sync 2 feature is configured
to be disabled by iDRAC. If the problem persists,
see
Getting help
information, see Integrated Dell Remote Access
Controller User's Guide at
idracmanuals
Administrator User's Guide
openmanagemanuals
System diagnostics and indicator codes
43.
Getting help
on page
on page
43.
on page
43.
on page
43. For more
www.dell.com/
or
Dell OpenManage Server
atwww.dell.com/
.
R840xd Owner's Guide
43.
33