Dell PowerEdge XL 5133-4 Посібник для початківців - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник для початківців для Перемикач Dell PowerEdge XL 5133-4. Dell PowerEdge XL 5133-4 38 сторінок. Dell poweredge m i/o aggregator getting started guide

Друкувати сторінку

1. Internal Ports

FlexIO

Modules with Uplink Ports

On the Aggregator, FlexIO plug-in modules (Figure 1-2) operate only as

uplinks; stacking is not supported. The following modules are supported in

the two expansion slots:

•

4-Port 10-Gigabit Ethernet module using SFP+ optics or direct-attach

cables (1m, 3m, or 5m DAC)

4-Port 10GBASE-T module using RJ-45 connector (copper) cables

NOTE:

Only one 4-Port 10GBASE-T module is supported in an Aggregator.

NOTE:

The 10M speed is not supported on the 4-Port 10GBASE-T module. Only

100M, 1G, and 10G speeds are supported.

•

2-Port 40-Gigabit Ethernet QSFP+ (SR or direct attach only) module only

for 10GbE SFP+ connections using 4x10GbE breakout cables.

Figure 1-2. I/O Aggregator: FlexIO Modules

4-Port 10GbE SFP+ Module

4-Port 10GBASE-T Module (100Mb/1GbE/10GbE)

2-Port 40GbE QSFP+ Module

Hardware Overview