Awarepoint S2 Посібник з монтажу - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з монтажу для Аксесуари Awarepoint S2. Awarepoint S2 8 сторінок.

Introduction

Customer support: 1‐888‐TAGIT‐NOW

1.1

This system installation manual is for an Awarepoint employee or Awarepoint trained

service provider who intends to install the Awarepoint Sensor.

1.2

Preparing for Installation – Read this First!

1.2.1

Prior to installation, you will need the following tools and supplies:

1. Small Ethernet switches (if necessary to plug in your laptop)

2. Hospital Grade Power Strips (if necessary to put an Awarepoint Sensor in an outlet

that is full)

3. Installation Kit, consisting of the following:

4. Installation Tools, consisting of the following:

1.2.2

Prior to installation, you will need the following information:

1. Maps for all floors, in paper and electronic format with coverage area outlined

2. Awarepoint Bridge

Awarepoint Sensor S2

Installation Manual

Serial Cable with Null Modem Adapter and F‐F Gender Changer

Ethernet Cable

Zip‐Ties

Double‐Sided Tape Mounting Strips

Laptop

Terminal emulator software (we recommend TeraTerm, available from

http://www.tucows.com/preview/195282 )

USB to Serial adapter (if laptop does not have a serial port)

Wire cutters – for trimming Zipties

Insulated blade screwdriver – for electrical faceplates, if you make an error

when taping the Awarepoint Sensors down

Phillips screwdriver – for installing the Awarepoint Appliance

IP Addressing: DHCP or Static. If using Static addressing then: IP Address, Default

Gateway, and Subnet Mask.

IP Address of Awarepoint Appliance