Miele Imperial DWW 750 Посібник з експлуатації та встановлення - Сторінка 27
Переглянути онлайн або завантажити pdf Посібник з експлуатації та встановлення для Вентиляційна витяжка Miele Imperial DWW 750. Miele Imperial DWW 750 40 сторінок.
Друкувати сторінку
– Proceed to "Connection for air ex-
traction" section.
If site conditions are not suitable for the
cooker hood to be used for air extrac-
tion the appliance must be connected
for recirculation.
– Push the directional unit on to the
top retaining plate.
– Fit the reducing collar ø150 / ø125
mm into the exhaust socket of the
motor unit.
– Secure the flexible hose supplied to
the directional unit and to the reduc-
ing collar on the motor unit using
hose clips.
– Insert the recirculation micro-filters
(see section "Cleaning and care").
The recirculation micro-filters
necessary for recirculation are avail-
able from the Spare Parts Depart-
ment or your dealer.
– Insert the mains supply plug into the
socket before carrying out further in-
stallation.
An extension piece allows the cooker
hood to be fitted at varying distances
from the ceiling (see section on "Ap-
pliance dimensions").
The extension piece has an opening on
each side. These are needed when the
appliance is being used in recirculation
mode.
Recirculation
For recirculation the extension piece is
fitted with the openings at the top.
For air extraction the openings are not
required. In this case the extension
piece is fitted with the openings at the
bottom. They are then covered by the
tower shaft.
Extraction
27