Miele PT 7186 Vario Інструкція з експлуатації - Сторінка 36
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Сушарка Miele PT 7186 Vario. Miele PT 7186 Vario 40 сторінок. Tumble dryer
Також для Miele PT 7186 Vario: Введення в експлуатацію, схема програми та налаштування (40 сторінок)
Друкувати сторінку
Settings/Supervisor level menu
Settings which can only be
changed during the
commissioning process
If you wish to change the settings after
the commissioning process, please
contact the Miele Service Department.
Payment system
A coin box needs to be fitted.
– No coin box
– Program operation*
The tumble dryer is operated using a
coin box. The user purchases a
wash program.
– Timed operation*
The tumble dryer is coin-operated
using a time meter. The user
purchases a time-controlled
program.
– RS 232*
When the tumble dryer is
coin-operated, serial interface RS
232 is activated.
– IK6*
When the tumble dryer is
coin-operated, serial interface RS
232 for the IK6 is activated.
* Then the following settings are
offered: Coin mechanism lock, Signal to
Pin 7, T-max exceeded, Duration cool
air, Cool air free, Duration hot air.
36
Coin mechanism lock
In coin operation mode, the payment
system can be set so that
programming changes can be made
within a specified time period without
losing the coins.
– Off
– Immediately after starting
Cancellation and changes not
possible without loss of payment.
– 1 minute after starting
(up to 5 minutes)
Cancellation and changes not
possible after this time period without
loss of payment.
Signal to pin 7
Setting the feedback signal for the
coin box.
– Program end
A signal is sent to pin 7 on the coin
mechanism at the end of the
program.
– Release the start button
A signal is sent to pin 7 on the coin
mechanism when the start button is
released.
– Start and program end
A signal is sent to pin 7 on the coin
mechanism when the start button is
released and at the end of the
program.