Miele T8012C Інструкція з експлуатації та монтажу - Сторінка 33
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та монтажу для Сушарка Miele T8012C. Miele T8012C 40 сторінок. Large capacity vented dryers flat controls, stacked washer & dryer example combination
Також для Miele T8012C: Розміри виробу (11 сторінок)
Друкувати сторінку
Installation beneath a counter
,
When the machine lid needs to
be removed to reduce the height of
the machine, a built-under spacer
kit* is necessary.
It must be installed by a Miele
Service Technician.
The cover plate of the built-under kit
replaces the appliance lid and
ensures electrical safety.
An installation manual is supplied with
the built-under spacer kit.
The electrical connection should be
near the dryer and accessible at all
times.
Extended machine feet* are
recommended at a built-in height of
1
more than 33
/
16
^ Set the extended machine feet on a
9
height of 1
/
16
Remove the original machine feet
and replace them with the extended
ones.
One or two filler frames* are
recommended at a niche height of
1
13
34
/
" / 34
/
" to 36" / 36
4
16
(870/885 - 915/930 mm).
* (optional accessory)
An existing continuous toe kick must
be interrupted at the dryer location!
" (840 mm).
" (40 mm).
5
/
"
8
Reinstallation of the machine lid
When reinstalling the appliance lid,
check the firm fit of the cover at the rear
bracket for a safe transport of the dryer.
Installation
29