ALLNIC AUDIO H?1500 II PLUS PHONO STAGE Посібник користувача - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач ALLNIC AUDIO H?1500 II PLUS PHONO STAGE. ALLNIC AUDIO H?1500 II PLUS PHONO STAGE 12 сторінок. Phono stage
Друкувати сторінку
SPECIFICATIONS FOR THE ALLNIC AUDIO H‐
1500 II PLUS PHONO STAGE
•
Inputs: Moving Coil (MC)
Moving Magnet (MM)
•
Ground: Two (2) x screw type
terminal
•
Outputs: One (1) pair x
unbalanced (RCA)
•
Frequency (RIAA): 20Hz ~ 20KHz
(±0.3db)
•
Voltage Gain: +40db (1KHz) MM
•
Input Impedance: MC up to 117Ω (see
•
Maximum Input
Voltage
(MM, non‐clipping): 20Hz / 30mV
•
THD
(Total Harmonic
Distortion): Less than 0.17%
•
Output Impedance: 430Ω(On ‐ off
method)
•
S/N Ratio: ‐86db (CCIR, 1KHz)
× two (2) pairs
unbalanced (RCA)
x two (2) pairs
unbalanced (RCA)
+66db (1Khz) MC
"Impedance" in the
Initial Set‐Up section,
above)
MM 47kΩ
100Hz / 100mV
1KHz / 240mV
10KHz / 280mV
(1KHz, Output 1V)
Tubes:
5842 x 2, signal gain
(similar to WE 417A).
•
Power Consumption: 70W – 110/120 / 60Hz
•
Fuse: AC 2A, 250V
•
Dimensions:
‐ Phono Stage: 430mm (16.9 inches) x 275mm
‐ Power supply: 170mm (6.7 inches) x 275mm
•
Weight: Phono Stage: 7.2 Kg (16 lbs)
9
E282F x 2, driver and impedance
matching (no equivalent).
7233 x 2, series voltage regulator
(similar to CV4079).
6485 x 2, automatic voltage
regulator (similar to 6AH6,
6AH6WA, 6AH6S.
5AR4 x 1, rectifier ‐ in the
power supply (same as GZ34).
(10.8 inches) x 118mm (4.65
inches) (W x D x H)
(10.8 inches) x 118mm (4.65
inches) (W x D x H)
unpacked
Power supply: 8.1 Kg (18 lbs)
unpacked
Both units in original packing:
20 Kg (44 lbs)