ALLO STM Посібник зі швидкого встановлення - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Брандмауер ALLO STM. ALLO STM 9 сторінок. Sip threat manager
Також для ALLO STM: Посібник зі швидкого встановлення (11 сторінок)
Друкувати сторінкуSTM Appliance 1.0
Initial Setup & Configuration
1. Unpack the items from the box
2. Check that you have all the items listed in the package content.
3. Connect the appliance to the power socket using the USB power cable.
4. Connect the LAN port of the STM to the PBX/VOIP Gateway.
5. Connect the WAN port of the STM to the untrusted/public network.
6. The device will take about a minute to come up & will be fully functional with the default
configuration.
Note:
Some of the PBX/Gateway devices may have an exclusive LAN/Mgmt Interface for device
management purpose other than the Data Interface (also referred as WAN/Public Interface).
In such cases LAN port of the STM should be connected to the Data Interface (aka
WAN/Public Interface).
The device operates as transparent bridging firewall with Deep Packet Inspection enabled
on the SIP traffic. By default, the appliance has been made to acquire the IP Address via
DHCP.
The device has been made to be fully functional with the default configuration. However if
the user needs to tune the device settings & the DPI policies, He/She can tune the
configuration via the Device WebUI.
The device also provides the command line interface accessible via SSH, which will allow
configuring the basic settings and viewing device status.
Management Access
Web GUI
SSH CLI
Management Vlan IP
Quick Installation Guide V2.0
www.allo.com
Login Credentials
admin/admin
admin/stmadmin
192.168.100.1/255.255.255.0
4