Alloy POE100 Series Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Конвертер мультимедіа Alloy POE100 Series. Alloy POE100 Series 9 сторінок. 10/100 base-tx to 100base-fx converter poe power provider

Друкувати сторінку

1. Overview

The POE Series IEEE 802.3u compliant media converters support two types

of media 10/100 Base-TX and 100Base-FX. With LFP (Link Fault

Propagation) support it allows the administrator to easily diagnose link faults

on their network. If the Copper or Fibre link fails, the converter forces the link

status of the connecting device to also fail.

The POE100 Series of media converters are designed for applications where

the supply of power to attached Ethernet devices needs to be via the network

connection, rather than by a power cord. Typical devices that use this method

of powering are VoIP Phones, Wireless Access points and IP based Cameras.

The POE100 Series media converters are fully compliant to the IEEE 802.3af

standard. The converters include PD (Power Devices – POE120 Series, IP

Phones, Wireless Access Points etc.) signature sensing and power monitoring

features compliant with the IEEE 802.3af standard, This includes, PD

discovery, classification, current limiting and other necessary functions. It also

supports high levels of safety support with short circuit protection and power-

out auto-detection to the PD.

2. Model Description

Model

POE100 Series

100Mbps Fibre Transceiver

ST/SC Multimode 2Km

SC.S05/S20/S40/S60Km Single Mode

SC.S80/S100Km Single Mode

Single Fibre Model

1310nm Single Mode 20Km

1550nm Single Mode 20Km

Note:

The 1310nm and 1550nm models must be installed in pairs,

i.e., install 1310nm model at one end and the 1550nm model at the other end.

Power Description

AC: 100 ~ 240V 50 ~ 60Hz

TX, RX Wavelength

TX (Transmit) 1310nm

RX (Receive) 1550nm

TX (Transmit) 1550nm

RX (Receive) 1310nm

Wavelength

1310nm

1550nm