Miller 301571 Посібник користувача - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник користувача для Зварювальна система Miller 301571. Miller 301571 36 сторінок. Air and water-cooled guns

Друкувати сторінку

5-5. Threading Welding Wire Through Gun

For XR-Aluma-Pro Plus Gun:

Welding wire is electrically live when

gun trigger is used to jog wire.

Turn OFF coolant supply before threading wire

through gun..

Tools Needed:

Cut off wire. Close and

latch wire feeder door.

Refer to wire feeder manual for instructions on

feeding wire through feeder.

JOG / PURGE

Lay gun cable out straight. Press Jog switch until about 6

in. (152 mm) of wire is sticking out end of contact tip.

Verify pressure adjustment

on handle matches the wire

type. See Section 6-2.

Ref. 285542-A / 285543-A

OM-285555 Page 11