Miller 301571 Посібник користувача - Сторінка 22
Переглянути онлайн або завантажити pdf Посібник користувача для Зварювальна система Miller 301571. Miller 301571 36 сторінок. Air and water-cooled guns
Друкувати сторінку
7-2. Cleaning The Gun Liner On XR-Aluma-Pro Plus Guns
5
6
5
OM-285555 Page 18
1
2
4
4
3
Gun End
Power Pin End
7
8
Power Pin End
!
Turn Off welding power
source and wire feeder.
NOTICE − Clean gun liner be-
fore cleaning stainless tube and
inlet guide.
Lay gun cable out straight.
1
Cable Cover Jacket
Remove cable cover jacket as
described in Section 6-8 to ac-
cess liner assembly.
2
Liner Guide Reducer
3
Liner Lock Allen Screw
4
Power Pin
5
Air Nozzle
Loosen liner lock allen screw
(located near back of handle) to
remove liner guide reducer from
gun.
Blow air from power pin end
through liner until clean of de-
bris.
Reinstall liner assembly into
gun and firmly tighten (do not
overtighten) liner lock allen
screw when finished cleaning.
NOTICE − Do not overtighten
liner lock allen screw.
6
Top Cover
7
Set Screw (Inlet Guide)
8
Inlet Guide
Remove inlet guide. From pow-
er pin end, blow air through liner
and stainless tube until free of
debris.
Reinstall inlet guide.
Ref. 285542-A / T0080-A