Miller XR-Aluma-Pro 35W Посібник користувача - Сторінка 14
Переглянути онлайн або завантажити pdf Посібник користувача для Зварювальна система Miller XR-Aluma-Pro 35W. Miller XR-Aluma-Pro 35W 36 сторінок. Air and water-cooled guns
Друкувати сторінку
5-3. 14-Pin Plug Information For Connecting Wire Feeder To Power Source
*The remaining pins are not used.
5-4. Opening Top Cover Of XR-Aluma-Pro Plus Gun
OM-285555 Page 10
Pin*
1
Motor 0 to +24 volts DC with respect to pin 2
2
Motor Common
3
+5 volts DC tachometer power
4
Tachometer ref
5
Tachometer signal
6
Trigger
7
Trigger
8
Wire speed ref. +5 volts DC
9
Wire speed com
10
Wire speed 0 to +5 volts DC with respect to pin 9
11
Gun sensing resistor with respect to pin 9
12
Not used.
13
Not used.
14
Not used.
1
Pin Information
1
Top Cover
Squeeze sides of cover and lift up
as shown.
To close cover, pivot cover closed
on gun, and push cover down until
cover locks tight.
Ref. 285542-A